All articles

How do I insert the Bobbin in my Onyx?Updated 10 months ago

Your Husqvarna Viking Onyx Sewing Machine features an easy-to-use top-load bobbin. Lets insert the bobbin! 

PREPARE: 

Make sure that the needle is fully raised and the machine is turned off before inserting or removing the bobbin. 

1. Open the bobbin cover by pushing the release button to the right (A). Remove the cover (B). 

2. Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction. 

3. Draw the thread at the arrow markings into the stitch plate thread guide from (C) to (D). 

4. Pull the thread at the arrow markings into the stitch plate thread guide from (D) to (E). To cut off excess thread pull thread back over the cutting off blade at point (E). Close the bobbin cover plate. 

5. Replace the bobbin cover.

Was this article helpful?
Yes
No